Epoxy glue for professional joining of different types of surfaces, particularly plastic. Forms a lasting adhesive bond between the majority of material combinations such as: plastics, metals, ceramics, porcelain, glass fiber, glass, PVC, leather, wood and many others. Resistant to water, gasoline and kreosene. Fills gaps in material up to 10 mm of thickness. Adhesive bond begins to set after 7 minutes. Leave the glued item undisturbed for 15 minutes. The bond archieves 75% of final strength after 2h and sets full after 24h. Lower temperatures may extend the bonding time. A full cured adhesive bond can withstand temperatures form -55C to +120C. The compressive strength of the bond is up to 305 kg/cm2. Does not bond with plyethylene (PE) and polypropylene (PP) plastics.
Application: Before use, make sure that the surfaces are clean, dry and roughened. Unscrew and remove the dosing tip safety cap, squeeze out the necessary amount of glue. The specially designed dosing tip allows to accurately and uniformly dispense both glue components at the same time. Immediately mix these two componenets and apply them onto the joined surface. Cap the syringe immediately after use to prevent the glue from drying up.